* If you click a link on this page and make a purchase, we may receive a small commission at no extra cost to you. Learn more.

Best 10-Inch Miter Saw in 2020 – Buyer’s Guide

When it comes to picking a good 10-inch miter saw, there are a few things that you need to look for. How much power does the motor provide? How heavy is the saw? Does it bevel in both directions or just to the left? We have all the answers.

In this article, you’ll find a full list of the best 10-inch miter saws on the market, their pros, their cons, and everything in between. So, without further ado, here we go!

List of The Best 10-Inch Miter Saw:

Our Top Picks:

Miter SawEditor’s RatingsWeight Power Price
DEWALT DWS713 5 31 lbs 15 Amperes, 5,000 RPM Check Price
Metabo HPT C10FCGS 4.5 24.5 lbs15 Amperes, 5,000 RPM Check Price
Makita LS1018 4 43.7 lbs13 Amperes, 4,300 RPM Check Price
Bosch CM10GD 4.1 60 lbs15 Amperes, 4,800 RPM Check Price
WEN 70716 4 37 lbs15 Amperes, 5,500 RPM Check Price

The 5 Best 10-Inch Miter Saws in 2020

1. DEWALT DWS713 Compound Miter Saw

DEWALT DWS713


Coming in the first place is the DEWALT DWS713. It is a powerful saw with a motor of 15 amperes and 5,000 rounds per minute(RPM)

The DWS713 is lightweight at just 31 lbs, and it provides a bevel that ranges 0-48 degrees to the left and only 0-3 degrees to the right. Also, it offers 14 positive stops of miter angles.

The DWS713 has a dimensional lumber cross-cut capacity of 2×6 at 90 degrees and 2×4 at 45 degrees. In addition, it has a vertical base molding capacity of 3-½” and a crown molding capacity of 4-½”.

Pros
  • Lightweight
  • 14 positive stops of miter angles
Cons
  • Only bevels 0-3 degrees to the right
  • A little expensive

Final Verdict

The DWS713 is one of the most popular saws on the market, and deservingly so. It is lightweight at just 31 lbs. It provides decent cutting capacities and decent beveling even though it only bevels up to 3 degrees to the right.


2. Metabo HPT C10FCGS Compound Miter Saw

Metabo HPT C10FCGS


The Metabo HPT C10FCGS was previously named Hitachi C10FCG. It has a powerful motor like the DW713 with 15 amperes and 5,000 RPM. The C10FCGS is lightweight at just 24.5 lbs, making it portable and easy to use for extended periods of time.

For added stability, it comes with a large table for better material support. It has a cross-cut capacity of 2×6” and 4×4”, and features a dust collection system. It also comes with a 24T blade that is not ideal for smooth cutting, and you’d probably need to purchase a separate blade.

The C10FCGS has a single bevel that ranges from 0-45 degrees to the left with positive stops at 0, 15, 22.5, 31.6, and 45 degrees. In addition, it can miter up to 52 degrees in both directions.

However, sometimes the saw arrives with cracks or feels loose, so make sure to check your saw thoroughly before using it.

Pros
  • Affordable
  • Lightweight
Cons
  • A single bevel
  • Could crack easily

Final Verdict

The C10FCGS is one of the best 12-inch compound miter saws on the market. It is lightweight and affordable. It also provides decent cutting capacities and a dust collection system. The downsides of this product would be that it only bevels to one side and that sometimes it arrives cracked.


3. Makita LS1018 10-Inch Dual Slide Compound Miter Saw

Makita LS1018


The Makita LS1018 provides two features that other products don’t. Firstly, it provides the linear ball bearing system that results in increasing the accuracy of the saw, and secondly, it provides the smooth start feature that makes the saw start at a lower speed to avoid damaging the material, then gradually increases the speed.

The LS1018 also provides a motor with 13 amperes and 4,300 RPM which is slightly lower than the rest of the saws on the list, but still powerful.

The LS1018 is a little on the heavier side with 43.7 lbs. It has a dual bevel of 0-45 degrees range in both directions. Also, it miters 0-47 degrees left and 0-60 degrees right with positive stops at 0, 15, 22.5, 31.6, and 45 in both directions.

However, multiple people have complained that the saw is of low quality, and breaks down after a while.

Pros
  • Provides a dual bevel
  • See-through blade guard system
Cons
  • Poor dust collection system
  • Not of the best quality

Final Verdict

The Makita LS1018 is quite an average saw if it wasn’t for its unique features; the linear ball bearing and the smooth start feature. These two features together increase its accuracy and make it a little gentler on the material at first to avoid any damage. Other than that, it has an average weight, an average price point, and an average motor.

Read more about: Makita 9557PBX1 Full Review


4. Bosch CM10GD 10 Inch Miter Saw

Bosch CM10GD


Thanks to its compact design and its axial-glide system, the Bosch CM10GD offers power and versatility that is hard to match. 

Its smooth cutting and compact size offer up to 10 inches less work space than other miter saws, which makes it suitable for working in tight places such as hallways.

The saw weighs 60 pounds, and it features a 15-ampere motor that provides 4,800 RPM with an exceptional cut capacity, 12” horizontal capacity, 5-½” vertical molding capacity, and a 6” crown molding capacity.

It can miter to the left up to 52 degrees and to the right up to 60 degrees. In addition, it features a dual bevel with a range of 0-47 degrees in both directions. The CM10GD also provides a dust collection system; however, it is inefficient.

Pros
  • Accuracy of the Axial-Glide system
  • Provides a dual bevel
Cons
  • Heavyweight
  • High price point

Final Verdict

The Bosch CM10GD has a lot of features that tempt you to buy it. All the way from its glide system, which increases the accuracy for the cuts, up to its cutting capacities. However, its heavyweight is a downside compared to other saws. There have also been a lot of complaints that it doesn’t cut straight. Not to mention the high price point.


5. WEN 70716 10-Inch Sliding Compound Miter Saw

WEN 70716


The WEN 70716 can bevel anywhere from 0 up to 45 degrees to the left, and miter up to 52 degrees in both directions. Also, it features a powerful motor of 15 amperes that offers up to 5500 rpm.

This product offers a crosscut capacity up to 11-½” and 3-¼” of thickness. It can aslo slice through any type of material and provide accurate cuts, wether they are straight, bevel, angle, or compound.

Speaking of weight, it weighs less than 40 pounds, which is one of the reasons it’s considered optimum. It includes a 60-tooth carbide-tipped blade, which provides a smoother finish.

Pros
  • Low price.
  • Lightweight.
Cons
  • Bad dust collection system.
  • Only bevels to the left.

Final Verdict

The Wen is tempting to buy, considering its affordable price and relatively high quality. It offers fast, clean cuts and cuts through almost everything. Its downsides would include that it only bevels to one side and the fact that the bolt holding the blade loosens after some uses.


How To Pick a Miter Saw

There are multiple factors that you need to consider when buying a miter saw; the first one is the weight.

1. If you’ll be using your miter saw for extended periods of time, weight is a critical factor. You wouldn’t want your saw to be too heavy and to tire out your arm after a few minutes. Any saw weighing under 40 lbs would be good, and under 30 lbs would be ideal. The next thing that you need to consider is the cutting capacity. You need to have a rough idea of the size of the material you’ll be cutting and get a saw that fits. If you’re unsure, just go a little higher than you think you’ll need in order to stay in the safe zone.

2. After you’ve decided what you’re looking for considering the weight and cutting capacities, you need to set up a budget. Expensive doesn’t always mean high quality. Also, don’t go too cheap as that may cause issues like lack of durability.

3. Read reviews. Read what people are saying on Amazon before making a final purchase. Also, always check your saw thoroughly when you first get it to make sure that there aren’t any manufacturing defects.

4. Look for accuracy, even if you don’t need it. You wouldn’t want you saw to cut in a curve or to cut too far away from where you’re aiming. Also, dust collection can be useful, but it’s not the end of the world if it’s inefficient. It’ll just slow you down a bit.

10-Inch Vs. 12-Inch Miter Saws

10-Inch Saws

10-inch saws are known for being used in smaller tasks that require having a generally smoother finish. They’re usually smaller and lighter in weight, making them easy to use and carry for extended periods.

Their small size also contributes to having a higher RPM, which leads to a smoother finish. They spin faster, and they are smaller. Both features improve their accuracy and precision. In addition, they tend to wobble less than 12-inch saws.

Also, they are generally more affordable and are easier to find than the 12-inch saws.

12-Inch Saws

On the other hand, 12-inch saws take the cake when it comes to versatility as they can cut wider and thicker materials. Their motors are usually more powerful than the 10-inch motors in order to withstand more pressure and to cut thicker materials.

Also, 12-inch saws are the winners when it comes to precision; you can attach a 10-inch blade to a 12-inch saw but not the opposite.

Final Words

10-inch saws are exactly what you should consider if you’re looking for precision and accuracy while being on a budget. Our top three recommendations are the DEWALT DWS713, the Metabo HPT C10FCGS, and the Makita LS1018 in order.

The DEWALT DWS713 is lightweight, durable, and has decent cutting capacities. However, it can only bevel up to 3 degrees to the right and is a little pricey.

The Metabo HPT C10FCGS is affordable, extremely lightweight, and has a decent dust collection system. However, its quality seems to be low as it could crack. Also, it only has a single bevel.

The Makita LS1018 has a dual bevel, which is a massive advantage as it can save you a lot of time and effort. Also, it has a see-through blade guard system that allows you to see the blade for increased precision. However, it also seems to be low quality, and its dust collection system is inefficient.

John Graham

My name is John Graham, a 32-year old avid DIY-er. Ever since I was young, my father used to prompt me to help fix things around the house or even building my own cupboards and shelves. That’s why I developed the habit of doing everything on my own. And since this is the only way to reach the unique results I really want, I don’t like depending on any services. With all the projects I’ve worked on, I’ve gained a lot of experience and wanted to gather it all in one place. And that’s where the idea to create “Tool Dizer” dawned on me, and here I am trying to connect with all the DIY enthusiasts out there.

Leave a Reply

Your email address will not be published. Required fields are marked *