The possibilities are endless when it comes to finding a good 12-inch miter saw. Each saw has its own specs, and it can get confusing trying to compare them all together. Well, you don’t need to worry for much longer as we have thoroughly researched the models on the market. Here’s a list of the best 12-inch miter saws that you can find.
List of The Best 12-Inch Miter Saw:
- DEWALT DWS780 – Best Overall
- Bosch GCM12SD – Runner Up
- DEWALT DWS715 – Lightweight
- DEWALT DWS709 – 13 Positive Bevel Stops
- Milwaukee 6955-20 – High Accuracy
Our Top Picks:
|Miter Saw||Editor’s Ratings||LEDs or Laser||Weight|
|DEWALT DWS780||4.6||LEDs||56 lbs|
|Bosch GCM12SD||4.6||None||65 lbs|
|Dewalt DWS715||4.8||None||42.8 lbs|
|Dewalt DWS709||4.7||None||51 lbs|
|Milwaukee 6955-20||4.3||Dual Lights||78 lbs|
The 5 Best 12-Inch Miter Saws in 2020
1. DEWALT DWS780 – Best Overall
The DWS780 has earned its spot on the top of the list with its XPS system and its powerful motor with a power of 15 amperes and 3800 rounds per minute(RPM).
Its XPS system offers an ultra-bright LED lights that cast a shadow where the bland will come in contact with the material for increased precision. However, LEDs are not the best when it comes to working in daylight, as you may not be able to see the shadow properly.
In addition, the DWS780 is lightweight at just 58 lbs, making it ideal for extended periods of usage time. Also, the DWS780 can miter up to 60 degrees to the right and 50 degrees to the left and has a dual bevel with positive stops at 0, 22.5, 33.9, 45, and 49 degrees.
Lastly, it has a crosscut capacity of 16” 90 degrees with extensions and 4×8 at 45 degrees, a vertical base molding capacity of 6-¾” and a vertical crown molding capacity of 7/12”. The DWS780 comes with a 32T blade, which is not ideal if you’re looking for a smooth finish.
- XPS system
- Inefficient dust control
- LEDs are inefficient in daylight
The DWS780 is one of the best miter saws on the market. It comes with the XPS system for exceptional precision and a powerful motor. It can miter up to 60 degrees right and 50 degrees left with a dual bevel that has 10 positive stops. Lastly, it offers one of the best cutting capacities on the market.
Read also: This review of DWS780 vs. DWS782
2. Bosch GCM12SD – Runner Up
The runner up, GCM12SD, is still a great miter saw with an axial glide system that saves up to 10” of working room. The GCM12SD offers wide cutting capacities at a compact size.
With a powerful 15 amperes motor and 3800 RPM, it has a crosscut capacity of 14”, a vertical base molding capacity of 6-½” and a vertical crown molding capacity of also 6-½”. While these numbers are not as high as the DWS780, the Bosch GCM12SD is still considered one of the best saws on the market.
Not as lightweight as the DWS780, this product weighs at 65 pounds. The GCM12SD also provides a dual bevel with positive stops at 0, 33.9, 45, and 47 degrees in both directions. Also, it can miter up to 52 degrees to the left and 60 degrees to the right.
Lastly, this product comes with a 60T blade for a smoother finish and an impressive 90% dust collection. However, it doesn’t provide laser or LEDs.
- Compact size
- 90% dust collection
- No LEDs or laser
- Sometimes does not cut straight
The Bosch GCM12SD is a great miter saw if you are not a beginner, as it doesn’t offer laser nor LEDs, which takes away from precision and accuracy. It is compact and offers decent cutting capacities and a powerful motor.
3. DEWALT DWS715 – Lightweight
The DEWALT DWS715 offers an even more powerful motor than the two previous products with 15 amperes and 4000 RPM and even lighter weight at just 42.8 lbs.
Not only is it more powerful and lighter, but it is also cheaper. The DWS715 is the most affordable saw on the list, and it offers just as good (if not even better) specs than any other product on the market.
The DWS715 provides a bevel with 14 stops at 0, 33.9, 45, and 49 degrees and a range of 0-48 degrees to the left and 0-3 degrees to the right. The DWS715 also offers a crosscut capacity of 2×8 inch of dimensional lumber at 90 degrees and 2×6 inch at 45 degrees and a vertical base molding capacity of 6-½ inches and a vertical crown molding capacity of 5-¼ inches., and a decent dust collection system.
However, like the GCM12SD, the DWS715 has no laser or LED lights. In addition, the blade is not ideal, and you’d probably need to purchase a separate one.
- No LEDs or laser
- Limited bevelling to the left of just 3 degrees
The DEWALT DWS715 is affordable, lightweight, and powerful. It has decent cutting capacities and decent bevel angles. However, it can only bevel up to 3 degrees to the left, its blade is not efficient, and it doesn’t have LEDs or laser.
Read also: 10-Inch vs 12-Inch Miter Saw
4. DEWALT DWS709 – 13 Positive Bevel Stops
The DEWALT DWS709 is one of the most popular saws on the market. It is lightweight at just 51 lbs. It has a powerful motor of 15 amperes and 3,800 RPM.
The DWS709 offers 9-½” of crosscut capacity at 90 degrees, and a vertical base molding capacity of 4-½“ and a vertical crown molding capacity of 5-½”.
The DWS709 miters to the left up to 50 degrees, and to the right up to 60 degrees. It has a dual bevel with 13 positive stops. In addition, the DWS709 comes with a 32T blade, and as mentioned before, 32T is not ideal for smooth cuts.
It does come with an inefficient dust collection system, and it lacks laser and LED lights.
- 13 positive bevel stops
- No laser or LEDs
- Inefficient dust collection system
The DWS709 is another Dewalt product that we love. It has a powerful motor; it is lightweight, and it has decent cutting capacities that will most likely get the task done. However, its dust collection system is inefficient, and it doesn’t come with laser or LEDs.
5. Milwaukee 6955-20 – High Accuracy
The Milwaukee 6955-20 saw is known for its exceptional accuracy that goes up to 0.1 degrees, and self-zeroing system for all miter angles.
Besides its accuracy, 6955-20 has another distinctive feature that you probably haven’t seen before. It starts slowly at first to allow you to go into the material gently the first couple of seconds then speeds up to its 3200 RPM.
The 6955-20 has a dual bevel with 9 positive stops, and left and right bevel range of 0-48 degrees. It also provides a dust collection system of 75%.
Like the DWS780, the 6955-20 also has lights that cast a shadow where the blade will land. However, the 6955-20 is a little on the heavier side with a weight of 78lbs. The 6955-20 has 13-1/2” of crosscut capacity at 90 degrees. Also, it comes with a 60T blade for a smoother finish.
- High accuracy that goes up to 0.1 degrees
- Starts slowly then speeds up
The Milwaukee 6955-20 is the best saw you could pick if you’re looking for precision and accuracy. It has guide lights, an accuracy of 0.1 degrees, and a self-zeroing system. It is not the most powerful motor with only 3200 RPM, and it is expensive and heavy.
How To Pick a Miter Saw
When it comes to picking a miter saw, there are a few things that you need to take into consideration
It goes without saying that you need to look for a saw within your budget. However, make sure not to pick the cheapest saw you find. You get what you pay for.
Accuracy and Precision
You wouldn’t want your saw to have low accuracy as that can ruin your task at hand. You should look for saws that have a laser or LED lights that show where the blade will land.
Some people prefer LEDs to laser as it casts a shadow where the blade will land exactly, rather than right next to the blade like the laser does. However, LEDs can be useless when working in daylight, as you wouldn’t be able to see that shadow clearly.
There’s no right or wrong here. Cutting capacities depend on how big your material will be. In order to be safe, if you’re unsure, a 14” on crosscut capacity should do you just fine. You could also go up to 16” if you want to be ultra-safe. A safe vertical molding capacity would be around 6” and a vertical base crown molding capacity around 6” as well.
Having dust go everywhere, including your face, can slow down your progress and is just annoying to deal with. Not all dust collection systems are efficient, so be careful when looking for a saw with a good dust collection. Note that you can always purchase a separate one.
The blade controls how fast you’re cutting and how smooth your finish is. A 60-T blade should do you just well if you’re looking for a somewhat smooth finish. However, it would be better just to purchase a separate blade that does precisely what you want rather than depend on the blade that comes with the saw.
12-Inch Vs. 10-Inch Miter Saws:
When it comes to the price point, 10-inch saws are generally less expensive than 12-inch miter saws.
Accuracy and Precision
There is no clear winner at this point. 10” blades are usually more accurate and precise. However, you can attach a 10” blade to a 12” saw. There are other factors that have a significant advantage when it comes to precision like having laser, LED and any additional feature that a saw has over the other.
12-inch saws have a larger radius; therefore, a heavier weight. You can easily find lightweight 12-inch saws, but they aren’t as common as 10-inch saws. However, that may not really be an issue as 12-inch saws are faster and more efficient than their 10-inch counterparts.
Generally, 12-inch miter saws tend to have more powerful motors in order to withstand their heavier weight, and because 12-inch miter saws are designed for heavy-duty tasks.
Because the 12-inch saws have more powerful motors, they have higher cutting capacities. You can cut thicker or wider materials with 12-inch saws that 10-inch saw would not be able to withstand.
10-inch saws usually have higher RPM than 12-inch saws, which leads to a smoother finish.
12-inch miter saws are powerful. They cut deep and fast, which makes them ideal for more significant tasks. Picking a good 12-inch miter saw is not an easy task as you need to look into specs, capacities, weight, and price point. Here are our top 2 recommendations.
Starting with our first place winner, the DEWALT DWS780 is a customer’s favorite. It is lightweight, features an XPS system for accuracy, and provides decent cutting capacities. However, the XPS system can be entirely useless in daylight, as you will not be able to see the shadow.
Coming in second place is the Bosch GCM12SD, which is known for its compact size. It can save you lots of space and allow you to work in tighter areas. In addition, it has an efficient dust control system that can absorb up to 90% of the dust. However, it is not as accurate as you’d want it to be, as it doesn’t offer laser or LEDs, making it hard to use for beginners.