* If you click a link on this page and make a purchase, we may receive a small commission at no extra cost to you. Learn more.

Best 60-Gallon Air Compressors in 2020 – Buyer’s Guide

Best 60-Gallon Air Compressors in 2020 – Buyer’s Guide
Table of Contents
  1. List of The Best 60-Gallon Air Compressors:
  2. Our Top Picks:
  3. The 7 Best 60-Gallon Air Compressors in 2020
  4. What are the 60-Gallon Air Compressors Used For and Who Will Benefit From Them
  5. What to Look for When Buying a 60-Gallon Air Compressor?
  6. Frequently Asked Questions: 
  7. Final Words

A 60-gallon air compressor sounds intimidating and heavy. It is heavy; we’re not going to lie. However, it won’t be intimidating to you, once you get the hang of it.

We’ll tell you exactly what to look for, answer your frequently asked questions, and review the best 60-gallon air compressors.

List of The Best 60-Gallon Air Compressors:

  1. Quincy QT-54 – Best Overall
  2. DeWalt DXCMV5076055 – Runner-Up
  3. Ingersoll Rand 2340L5-V – Best Two-Stage Compressor
  4. Industrial Air IV5076055 – Another Industrial-Use Gem
  5. Puma Industries PK-6060V – Best Budget
  6. Industrial Air ILA3606056 – Most Lightweight
  7. Campbell Hausfeld XC602100 – Best Warranty

Our Top Picks:

Air CompressorWeight Max PSI CFM Dimensions
Quincy QT-54 475 lbs 175 15.4 @ 90 PSI 29 x 21 x 64 in
DeWalt DXCMV5076055 400 lbs 175 13.5 SCFM @ 175 PSI 40 x 31 x 80 in
Ingersoll Rand 2340L5-V 430 lbs 175 14.3 ACFM @ 175 PSIG 24 x 33 x 69 in
Industrial Air IV5076055 400 lbs 175 13.5 CFM @ 175 PSI 40 x 31 x 80 in
Puma Industries PK-6060V 305 lbs 135 11.3 CFM @ 90 PSI 71 x 29 x 20 in
Industrial Air ILA3606056 247 lbs 155 11.5 SCFM @ 90 PSI 23.5 x 26.5 x 69 in
Campbell Hausfeld XC602100 330 lbs 175 7.6 SCFM @ 90 PSI 74 x 31 x 27 in

The 7 Best 60-Gallon Air Compressors in 2020

1. Quincy QT-54 – Best Overall

Quincy QT-54


The Quincy QT-54 compressor is a beast. If you’re sick of other compressors being less powerful or durable than they’re made to be, you need this one. You might think it is expensive, so let us go through how cost-efficient it is. 

The compressor has a 100% duty cycle, and less than 5 PPM oil carry-over. The cast-iron pump has a long-lasting 30000-hour life rating. The pump also has low 1310 RPM and a built-in thermal overload, which keeps the unit cooler for longer.

At maximum pressure of 175 PSI and a CFM of 15.4 @ 90 PSI, the Quincy compressor proves itself worthy of heavy jobs and demanding air tools.

Pros
  • 15.4 CFM @ 90 PSI
  • Built-in thermal overload
  • 1310 RPM
  • 30000-hour life
  • Cast-iron pump
  • Built-in thermal overload
  • 100% duty cycle
  • Less than 5 PPM oil carry-over
  • 5 HP
  • Up to 175 PSI
  • Warranty can be extended to 3 years
Cons
  • Expensive

Final Verdict

The Quincy QT-54 is not cheap, because it has everything you’ll ever need in a compressor. Its high tolerance to industrial use and cost-efficiency has earned it the top place on our list.

Read also: The 7 Best 12V Air Compressor in 2020

2. DeWalt DXCMV5076055 – Runner-Up

DeWalt DXCMV5076055


The DeWalt two-stage compressor prides itself on being a heavy-duty one, yet a quiet one. Industrial use or long run time never seems to scare this one. Feel free to power ratchets, impacts, sanders, and cutting tools without worrying about overworking the unit.

The compressor has a 75 % duty cycle, maximum pressure of 175 PSI, SCFM of 13.5 @ 175 PSI, a pressure gauge, and an on/off switch. If you look elsewhere for a compressor for professionals, you won’t find a better one.

The pump has a patented design with cooling fins to keep the unit cool. Also, the compressor has low 767 RPM and thermal overload protection to protect the motor from voltage fluctuations.

The 2-year warranty surely gives you more confidence in the compressor.

Pros
  • Up to 175 PSI
  • 13.5 SCFM @ 175 PSI
  • 75 % duty cycle
  • Patented pump design
  • 5 HP motor with thermal overload protection
  • Low 767 RPM
  • Pressure gauge and on/off switch
  • 2-year pump
  • Quiet
Cons
  • Not user-friendly
  • Expensive like most two-stage compressors

Final Verdict

Like the Quincy compressor, this bad boy is for the heavy lifting that most compressors won’t handle. You have to keep in mind that it isn’t user-friendly, so only get it if you’re a professional who already knows what to do.

3. Ingersoll Rand 2340L5-V – Best Two-Stage Compressor

Ingersoll Rand 2340L5-V


The Ingersoll Rand compressor boasts durable cast-iron construction and longevity, promising 15000 hours of use.

The compressor’s use of synthetic oil also gives you 2000 hours of use between changeouts, meaning it performs four times longer than motor oil-lubricated compressors.

With a 5-HP motor, maximum pressure of 175 PSI, 14.3 ACFM @ 175 PSIG, a 100% duty cycle, this two-stage beast can handle the demands of automotive service, fleet maintenance, machine shops, woodworking shops, dry cleaners, car wash/repair shops, and farms.

The compressor has everything that could possibly keep it cool and prevent overheating, such as radical fins, a finned high-efficiency copper intercooler, and an integral flywheel.

Pros
  • 15000 hours of use
  • 5 HP
  • Up to 175 PSI
  • 14.3 ACFM @ 175 PSIG
  • 100% duty cycle
  • Radical fins for cooling
  • Quiet
  • Cast-iron construction
  • 2-year warranty
Cons
  • Doesn’t come with synthetic oil
  • The fitting containing the drain valve tends to leak

Final Verdict

This compressor is long-lasting, powerful, and quiet. What more do you need?

4. Industrial Air IV5076055 – Another Industrial-Use Gem

Industrial Air IV5076055


The Industrial Air IV5076055 is a heavy-duty beast that you can truly use in the mechanic shop, livestock operation, and service truck.

The compressor has a 5 HP-motor, maximum pressure of 175 PSI, and a 13.5 CFM @ 175 PSI, enabling you to power more than one tool simultaneously. Like any good compressor, it has a pressure gauge and an on/off switch to keep you in control.

This compressor knows how to maintain its coolness since it has a patented design with thermal overload protection, a wire form belt guard to keep it cool, cooling fins, and cast-iron flywheel. There is no fear of overheating with this one.

Pros
  • Up to 175 PSI
  • 13.5 CFM @ 175 PSI
  • 5 HP
  • Low pump RPM
  • Thermal overload protection
  • Wand wire form belt guard
  • Patented design
  • Pressure gauge and on/off switch
  • Super Quiet
  • 2-year warranty
Cons
  • Auto shutoff doesn’t work properly
  • Expensive

Final Verdict

This is a powerful, no-nonsense compressor that will last long and won’t overheat. If you’re a professional that needs something strong enough, this is it.

5. Puma Industries PK-6060V – Best Budget

 Puma Industries PK-6060V


Is this an industrial-use kind of compressor? No. It is perfect for work at home, the garage, or a small workshop.

The Puma Industries compressor is affordable and relatively lightweight – at 305 lbs. The wheels are also steel with ball bearing for mobility to offer you something that other 60-gallon compressors can’t: easy storage and mobility. Thanks to its vertical design, it takes up less space.

This baby features an oil-lubricated single cast-iron pump that is durable and impressive.

The pressure regulator and the quick coupler are here to control the pressure of outlet air.

If you’re still not impressed, its quietness will definitely impress you.

Pros
  • 11.3 @ 90 PSI
  • Affordable
  • Lightweight
  • Mobile
  • Cast-iron pump
  • Regulator
  • Quick coupler
  • Vertical design saves space
  • Really quiet
  • Overload protection
Cons
  • Can’t handle industrial use

Final Verdict

The Puma compressor should be your number one budget recommendation. Don’t expect it to replace the Quincy compressor in its large-scale abilities, though.

6. Industrial Air ILA3606056 – Most Lightweight

Industrial Air ILA3606056


Like its Puma Industries counterpart, this one single-stage air compressor isn’t meant for industrial use. It is good for home shops, garages, and DIYs. You can use it for painting, airbrushing, blow cleaning, and nailing.

The ILA3606056 comes with a maximum pressure of 155 and 11.5 SCFM @ 90 PSI, which is more than enough for any individual work. Also, it comes with a pressure gauge and an on/off switch for accuracy.

What’s impressive is the spread voltage motor that allows you to operate the compressor at either 208 or 240 volts.

The lightweight ILA3606056 that only weighs247 lbs comes with a bottle of synthetic oil to kickstart a long life of good maintenance for this compressor.

Pros
  • Affordable
  • Cast-iron
  • Twin-cylinder pump
  • Space-saving vertical design saves space
  • Pressure gauge and on/off switch
  • Spread voltage motor for 208 or 240 volts
  • Easy to use
  • Most lightweight
  • Bottle of synthetic oil
  • 2-year warranty
Cons
  • Loud at 83 dBs
  • Doesn’t come with an electrical cord
  • Gets hot

Final Verdict

The compressor is easy to use, lightweight and saves space. However, you have to get a power cord and ear protection to use it properly.

7. Campbell Hausfeld XC602100 – Best Warranty

Campbell Hausfeld XC602100


This two-stage baby can help you paint spray, inflate, sand, grind, staple, nail, and bolt. It promises 10000 hours of use, so you don’t have to worry about replacing it soon. Plus, you know a manufacturer trusts their products when you have a 3-year warranty.

The compressor has a 3.7-HP motor, maximum pressure of 175 PSI, and a 7.6 SCFM @ 90 PSI; it is basically strong enough to help you in most small or large jobs at an amazing price point. In addition, the cast-iron construction keeps it cool, so don’t worry about overheating.

Although it’s a 60-gallon compressor, it has a vertical design that saves space with a small footprint, making it perfect for small areas.

Pros
  • Up to 175 PSI
  • 10000 hours of use
  • 3-year warranty
  • Affordable
  • Space-saving vertical design
  • Cast-iron construction
Cons
  • Noisy

Final Verdict

This compressor isn’t the most powerful on our list, but it is good enough to be on it.

What are the 60-Gallon Air Compressors Used For and Who Will Benefit From Them

A 60-gallon air compressor is for anyone who wants an air compressor that can handle light and heavy-duty jobs. Why? Because they are capable of supplying a consistent airflow for longer before the pressure drops.

Not only can they power demanding tools, but they can also handle more than one tool simultaneously. So, you will end up saving more energy by getting a large-capacity air compressor.

Anyone who has the space for a massive unit that won’t let them down should definitely get a 60-gallon compressor.

What to Look for When Buying a 60-Gallon Air Compressor?

1. PSI and CFM

The PSI rating tells you the maximum air pressure the unit can have. Low PSI fits powering lightweight pneumatic tools, while high PSI fits heavy-duty jobs and industrial use. Most tools need to be powered by at least 90 PSI.

The more important companion of PSI is the CFM rating, which tells you the volume of the airflow. It is usually measured at 90 PSI since it is the common minimum requirement for most air tools.

Like PSI, the more demanding the work you’ll use the compressor for, the higher the CFM should be.

The right PSI and CFM depend on the same ratings of the air tools you’ll use the compressor with. You need to get one with even higher ratings so that it isn’t overpowered.

2. Duty Cycle

The duty cycle is the percentage that tells you basically how long your compressor can run and rest.

For example, if a compressor has a 25% duty cycle, in one hour, it will need to rest for 45 minutes for the15 minutes it runs. A compressor with a 50% duty cycle will need rest for 30 minutes for the 30 minutes it runs.

You might be tempted to push a compressor beyond its duty cycle to get the job done quicker, but we strongly advise you against that, as it will lead to overheating.

3. Oil-Lubricated or Oil-Free

Oil-lubricated compressors need you to oil their moving parts to prevent friction and increase their lifetime. Consequently, they need maintenance from you by oiling, draining, and changing the oil at least once a year.

Oil-free compressors, on the other hand, come pre-lubricated with substances like Teflon; thus, they require no maintenance from your end.

Oil-lubricated compressors are more durable because Teflon lubrication wears out with time. They are also less noisy than oil-free ones.

However, if you don’t keep your oil-lubricated compressor oiled or if you do not change the oil, you will damage the compressor permanently.

Frequently Asked Questions: 

Is a 60-Gallon Air Compressor Big Enough?

It depends on what you’ll use it for and the tool you’ll use it with. Comparing your tool’s CFM and PSI with the compressor is a must. The compressor must have higher air requirements than the tool, so it is not overpowered.

60-gallon compressors are more than okay for DIY and home uses. They have enough specs to get the job done in no time.

However, getting a 60-gallon compressor just for small jobs is a tad too much because they are heavy, they take a lot of space, and cost much more than 8-gallon compressors, of course.

So, if you’re getting one, make sure you’ll use it for larger jobs too. A 60-gallon compressor is perfect for industrial use, thanks to its massive capacity and relatively high CFM.

If the air requirements of your tool are still higher than 60-gallon compressors’, then you might need an even larger capacity.

How Heavy Is a 60-Gallon Air Compressor?

It differs from one compressor to another, but one thing for sure is that these things are heavy; a massive capacity doesn’t come for free. 

However, the difference in the material and construction does affect the weight dramatically. A cast-iron compressor isn’t going to weigh the same as a plastic one.

A 60-gallon compressor can weigh from around 178 to 600 pounds. The heavier models tend to be more dependable, but the lighter ones are easier to move and store; you won’t be moving a 60-gallon compressor much anyway.

What Is the Quietest 60-Gallon Air Compressor?

A quiet 60-gallon compressor is about 75 decibels.

The noise level in air compressors is measured by decibels or dBs. The higher the decibels, the louder the air compressor is. Prolonged exposure to loud noise -around 85 decibels- can be harmful, besides being annoying and unpleasant, of course.

Air compressors of thin materials and hollow components can be noisier than others. This noise can also result from placing them on echoey floors, such as concrete or hardwood. 

So, the search for an air compressor with decent features yet low noise levels can be challenging.

How Much Oil Does a 60-Gallon Air Compressor Take?

An oil-lubricated compressor’s moving parts need regular oiling to prevent friction. The amount by which the air compressor should be lubricated and the frequency will be stated in its manual. It is safe, however, to tell you that it varies from one compressor to another depending on the size.

Every oil-lubricated air compressor has an indicator for how much oil it takes. It is either an oil sight glass with a dot or an oil dipstick with markings. Depending on what they tell, you should either add more oil or drain it. 

Keep in mind that you need to completely change the oil at least once a year. The manual will give you the timeframe specific to each compressor in which you have to change the oil.

Generally, you need to change the oil every 7000 hours of use for a rotary-screw compressor and every 3 months of use for a reciprocating air compressor.

Final Words

We have reviewed all the products on our list. Let’s go through the essentials one more time.

If you’re looking for an industrial-use kind of compressor, make sure to check out the Quincy, the DeWalt, and the Industrial Air IV5076055 air compressors.

What about small jobs around the house? The Puma Industries and the Campbell Hausfeld air compressors would be more fit for you.

John Graham

My name is John Graham, a 32-year old avid DIY-er. Ever since I was young, my father used to prompt me to help fix things around the house or even building my own cupboards and shelves. That’s why I developed the habit of doing everything on my own. And since this is the only way to reach the unique results I really want, I don’t like depending on any services. With all the projects I’ve worked on, I’ve gained a lot of experience and wanted to gather it all in one place. And that’s where the idea to create “Tool Dizer” dawned on me, and here I am trying to connect with all the DIY enthusiasts out there.

Leave a Reply

Your email address will not be published. Required fields are marked *