* If you click a link on this page and make a purchase, we may receive a small commission at no extra cost to you. Learn more.

Best Table Saw Under $300 in 2020 – Buyer’s Guide

Best Table Saw Under $300 in 2020 – Buyer’s Guide

Are you looking for the best table saw, but whichever you like is too expensive? If yes, you are in the right place. We will help you get the best table saw under $300. Most people are of the opinion that table saws are mostly expensive and you can’t get the best quality table saw within $300. Well, most often, people don’t get their information updated. No doubt, finding the best table saw under $300 can be a challenging task, but it is not at all impossible.

With hundreds of brands and manufacturers in the market, you can often get confused about which is the best table saw. But you need to look at different factors before you choose the best table saw. The best table saw is one that suits your requirement. This article will help you purchase the best table saw under $300, and it will also provide you with additional information about the table saw. So, think of this article as your buying guide, and let’s start our search for the best table saw.

The 5 Best Table Saw Under $300 in 2020

1. DeWalt DW745 Table saw – Best Overall

DeWalt DW745  Best Table Saw Under $300

This is one of the best table saws you can ever buy. Once you get this table saw in the package, you will feel elated, as it is very lightweight, and it weighs just 45 pounds. Thus, the best part about this table saw is that you can carry it anywhere you want.

Since the table saw is very lightweight, it is very easy to handle and use. You won’t feel like you have worked hard, even after using this table saw for a longer duration.

You can get the most accurate cut by using this table saw. The rip fence of the table saw can be easily adjusted to give you different types of cuts. The table saw consists of a 10-inch blade that is most suited for small as well as big projects. Another amazing feature of this table saw is the dust collection port, which helps you reduce the mess when you are engaged in any kind of woodwork. All you need to do is to collect the dust with your vacuum cleaner and dispose of it with ease.

The beauty of this model is that it is very lightweight and powerful. The table saw is fitted with a 15 amp motor that contributes to the power and sturdiness of the table saw. Thus, there’s no point you will not like this table saw. No matter if you are a professional woodworker or a DIY person who loves to spend his/her spare time in woodwork, this table won’t disappoint you. The tool adjustment of this table saw is another amazing feature that you won’t get in most table saw under $300.

Pros
  • Best suited for small as well as big projects
  • Dust collection space makes it best for DIY projects
  • Powerful
  • yet lightweight
  • Portable and easy to use
  • Affordable
Cons
  • Not suitable for too big projects

2. SKIL 10-Inch Table Saw

SKIL 10-Inch Table Saw

The SKIL 10-inch is another best table saw under $300. The best feature of this table saw is the foldable stand, as it enhances its usability and functionality. The folding legs of the table saw make it easier to use anywhere you want and also to carry it from one place to another. The table saw weighs just 67 pounds, thus making it very easy to use and walk around with it. The table saw can easily move from 2-degree to 47-degrees without much alignment and changes. Thus, you can get a wide range of cuts using this table saw.

The table saw also has the ability to go for 5000 rotations per minute. In addition to these best features, the legs of the table saw can be easily stretched, thus giving you a better working area and better functionality while you are undergoing woodwork. The table won’t shake a bit, even when you have placed a heavy wood block. Thus, you don’t have to worry about the quality of the table saw.

This table saw uses a 10-inch blade for the woodwork and making cuts. Thus, all kinds of woodwork that can be carried out by this best table saw under $300. This table saw offers you the precision and accuracy you want in your woodwork. The saw is made up of best quality aluminum, which gives it longevity and strength. The 15 amp motor of the table saw is sufficient enough to provide you with the best cuts whenever you need it. Thus, you can use this table saw for professional woodwork as well as for home-usage.

The table saw also consists of a rip fence system that aligns itself automatically, and you don’t need to make adjustments every time you want to cut a woodblock.

Pros
  • Fast blade speed
  • Made up of strong material
  • Best value for money paid
  • Budget-friendly
  • Foldable legs
Cons
  • This table saw doesn’t come up with a dust extraction system.

3. Jiang Jinfeida Power Tools MJ10250VIII Table Saw with Laser

Jiang Jinfeida Power Tools MJ10250VIII Table Saw with Laser

If you want the best table saw under $300, but you want it to be fitted with the best technology, you should go for this table saw. This is one of the best master mechanics for all kinds of woodwork. The best part about this table saw is that it is fitted with laser technology that increases its precision and the ability to cut.

The industrial design of this table saw will enable you to use it for different purposes. The blade of the table saw can be tilted up to 45-degrees, and while cutting, you can go as down as 90-degrees. Thus, for all types and all ranges of cutting, this is the best equipment you can ever use.

The table saw is fitted with a 15 amp motor that provides it with speed up to 4800 RPM. The design of this table saw is quite compact, and the appearance is amazing. Thus, it won’t look like any ordinary table that you keep in your garage away from visitors. If you are a DIY kind of person, this can be the best table saw under $300 that you can use. It is one of the best table saws for home usage as it doesn’t take up too much space, and it is very easy and convenient to set up.

The top portion of the table saw is made up of aluminum, and it will provide you an excellent working space.  For people who look for the utmost accuracy, the table saw comes up with an easy view measuring system. Thus, all the adjustments and settings will give you a guaranteed and best result. The rip fence of the table saw comes up with a quick-release mechanism that enhances the functionality of this table saw.

Pros
  • Strong and easy to use
  • Compact design
  • Amazing appearance
  • Fitted with laser technology
Cons
  • The assembly direction provided with the product is not good enough.

4. Rockwell RK7323 Table Saw

Rockwell RK7323 Table Saw

The Rockwell table saw offers you the best value for the money spent. The table saw is very affordable, and it comes at less than $100. The design and the structure of the table saw is very compact, and you can carry it easily, wherever you want. All you need to do is to read the manual and set up the table saw easily. Even a non-technical person will find the installation process to be very easy.

This table saw can make different types of cuts easily with its high-powered motor. The rip cut, as well as the scroll cut, can be made easily by using this table saw. If you are a professional who works around wood, it is very important to have this table saw around you. In the absence of this table saw, you may need to use multiple saws to complete the same woodwork. So, why carry a set of the toolbox, if a single table saw can perform the task in no time?

The best part about purchasing this table saw is that you get a 3-year warranty with it. Most tables saw manufacturers don’t give warranty. Thus, it can be a good deal for you. For people who are a novice in the woodwork process, it may be difficult to get precision initially, but with practice, you can get the best cut you want.

Pros
  • Very easy to install
  • Strong and durable
  • Allows different types of cuts
  • Made up of best quality material
  • Three-year warranty
Cons
  • The table saw may lack precision while making certain types of cuts.

5. Delta Power Tools 36-6010 Portable Table Saw

Delta Power Tools 36-6010 Portable Table Saw

If you want to purchase the best table saw under $300, this table saw by Delta Power can be the best choice to make. The table saw comes up with a big power switch that you can’t miss looking at. The table saw also comes with a cord wrap that you can use to wrap the power cord around the saw when you are carrying it.

This table saw is made up of aluminum, and the design is very compact and durable. The extension pieces of the table saw adds to its beauty. The blade of the table saw comes up with a retractable design that and it can sink completely inside the table. Thus, the top of the table remains clear, allowing you to remove the sawdust and wood pieces easily. The best part about this table saw is the easy to access switch that can be turned on and off anytime you want.

So, if you are looking for the best table saw under $300, look no further than this table by Delta Power.

Pros
  • Built-in cord wrap
  • Aluminum table tops give more space
  • and thus
  • you can do your woodwork more conveniently. ● Blade of the table saw sinks easily in the table
  • thus making it easier for you to clean the sawdust.
  • Large power switch
Cons
  • The fence of the table saw doesn’t work well when you extend the table

How To Use a Table Saw?

Using a table saw is not a complicated thing to do. But for beginners, the process may seem a bit challenging. Thus, you need to follow all the below-mentioned points to use the table saw and to get the best cut for your woodwork:

Step 1: Safety First

If you are not a pro at using table saws, it is very important to keep safety in mind. The table saws are power equipment, and if you are not well aware of the safety tips, you may hurt yourself. Never work with a table saw, if you are not in a clear state of mind. Be physically as well as mentally present when you are working with a table saw. Don’t avoid wearing safety glasses. You don’t need to be afraid, but keep in mind that if you are not attentive enough, you may lose your hands or your eyes. Thus, read the safety tips provided by the manufacturer before you start using the table saw.

Step 2: Know about the parts of the table saw.

It is very important to know about all the parts of the table saw before you start using it.

Following are the parts of the table saw:

  • Table:
    it is the top where you keep the wood piece that needs to be cut
  • Fence
    The fence is a guide that stays parallel to the blade, and it keeps the wooden block at a constant distance from the blade so that it can be cut with utmost accuracy and precision.
  • Fence dog
    This part of the table saw locks the fence. If you want to move or change the position of the fence, you need to lift the hand of the fenced dog, and to lock it, you need to press the hand of the fenced dog.
  • blade
    The blade is the cutting part of the table saw. There are different types of blades in a table saw that allows you to cut as per your requirement.
  • Blade height adjustment wheel
    This part is used to adjust the height of the wheel to get the height you want for your woodblocks.
  • power button
    The power button is used to switch on or switch off the table saw as per the requirement.

Step 3: Know about the types of cuts

When it comes to the best table saw under $300, you can get three different types of cuts. Following are the three different types of cuts that you can get from a table saw:

Crosscut:

The crosscut is used to cut across the grain. You can get the crosscut if you use the meter gauge or the shred in a table saw.

Ripping cut:

The ripping cut basically cuts down the length of the board. This can be achieved by using the fence set. And it can give you the width you want as per your requirement.

Dado cut:

The dado cut is basically a wide cut. This cut is mostly used in joinery. You can achieve this cut by using the miter gauge or the fence. Some special blades can also help you to get the dado cut more conveniently and accurately.

Step 4: setting up the blade height

It is very important to set up the blade height appropriately if you want to get the best cut as per your requirement. Some people believe that the blade height should not be too high, and it should be approx ⅛-inches above the woodblock. While some believe that the blade should be as high as you want to be, the adjustment of the blade height should be made as per your requirement and convenience. But, it should neither be too low nor too high.

Step 5: Angled cuts

Not all cuts are straight. Sometimes you need the best-angled cuts. Thus, it is very important to have an idea about the angled cuts. Most table saws can make two different types of angled cuts. The first angled cut is done by a miter gauge, and the other one is achieved by tilting the blade. The wheel that helps you in changing the angle is placed at the side of the machine or the table. You also have an indicator at the front of the machine that helps you know about the height adjustment and other aspects.

Step 6: making the cut

Before you begin the cutting process, it is very important to take up measurements. In addition to this, it is advisable not to use the miter gauge and the fence at the same time. Begin the process by turning on the table saw. Then, smoothly advance the wood into the blade. Once you get the desired cut, switch off the machine. Make sure that your head should not come in line with any material around the blade. Don’t make any excessive force towards the fence, if you want to get an accurate cut. Remove all wood scraps slowly and easily. Don’t rush through this process.

Step 7: Maintenance

Just like any other equipment, your table saw will also need proper maintenance if you want it to work properly for a longer time. You don’t have to worry about too much maintenance as the best table saw under $300 is made up of the best quality material. But, it’s better to check the major tools and parts of the table saw before you begin the cutting process.

Following all the steps will enable you to use the table saw in the best way possible. Thus, if you are a beginner, it is important to know about these steps, before you purchase your first table saw.

Frequently Asked Questions about Table Saw

Q. What are some of the safety tips to keep in mind while using a table saw?

A. Some of the major safety tips to keep in mind include:

  • Never wear gloves while using table saws
  • Wear proper safety glasses
  • Be attentive while you are cutting wood blocks in a table saw
  • Stand comfortably to get a good balance while you are cutting.
  • Read proper instructions before you start using the table saw.

Q. What kind of electrical circuit is needed for using a table saw?

A. It is advisable to use a dedicated circuit for using a table saw. In addition to this, follow the user manual for more details as the details can vary, depending upon the type of table saw you have.

Q. Do I need to use a table saw stand?

A. No, you don’t need a stand to mount your table saw. Any flat and surface can work fine. But keep in mind that the work surface you have should have an 11-inch square opening below it so that the sawdust can easily fall below it. Thus, to prevent the clogging of the sawdust, it is important to have that opening.

Q. Does the drive motor on my table saw need lubrication?

A. Most table saws and their bearings are lubricated well at the factory during the manufacturing process. Since they are permanently lubricated, you don’t need to spend any extra bucks on the lubrication process. But, for safety and better functionality, you can lubricate the pivot points and the threaded rods. But make sure to use dry lubricants like graphite and silicon. The dry lubricants need to be used as they won’t attract or hold the sawdust when you are cutting.

Q. What are the best ways to maintain the table saw?

A. Some of the most important tips to maintain the table saw include:

  • Clean the sawdust inside the saw cabinet at regular intervals
  • You need to clean the blades regularly with gum remover
  • Clean the plastic parts of the table saw by a mild soap water
  • Check the blade raising before you begin the cutting process
  • After every 5 hours of operation, give some rest to the machine
  • Place some dry lubricant at the pivot points and threaded rods if you have used the table saw for more than five hours.

Q. Why does my table saw slow down under a light load?

A. Just like any other machine, your table saw can slow down in case of a light load. In addition to this, using an inappropriate extension cord can also lead to a slow down of your table saw. In addition to this, if you are making cuts by a dull blade, your table saw will slow down. Thus, the light load is not the not reason for your table saw to slow down.

Q. What height should I set the blade in a table saw?

A. The appropriate height to set the blade in a table saw is ⅛- inches. But the height may vary depending upon the brand of the table saw. Thus, go through the user manual to know about the height in detail.

Points to consider when purchasing a table saw.

When you are thinking about purchasing the best table saw under $300, several points need to be considered. Thus, if you are looking for the best guide to help you purchase the best table saw under $300, we can help you.

  1. Space available
    For any person looking for a table saw for domestic purposes, it is very important to look at the space available for woodwork. Less space will make the process of woodcutting tiring, and you won’t get the best result. But many compact designs are available in the market, so if you have less space, you can look for table saws that take up less space in your home.
  1. Motor power
    The table saw comes in different motor power. Thus, you need to check the motor power before you make the purchase. The motor power of the table saw is also dependent on the application of the saw. Thus, choose the table saw as per your requirement and don’t forget to pay attention to the motor power.
  1. Ease of use
    Purchasing the best table saw under $300 that is not too complicated when it comes to usage. To get an idea about the performance and usage of the table saw, go through some online reviews available online. This will give you an idea about the complication and ease of use of the table saw.
  1. price:
    Price should be an important factor when it comes to purchasing anything. But even if you are purchasing the best table saw under $300, make sure that the price is as per the value offered by the product. Don’t spend your hard-earned money on something that doesn’t provide you with the best value.
  1. safety
    It is very important to keep the safety features in mind before you purchase the best table saw under $300. The best table saw is one that is well-equipped with safety features. You can’t risk your life by purchasing equipment that doesn’t have enough safety features. Thus, keep your safety in mind before you purchase the table saw.

Safety guidelines to follow when using a table saw.

Safety is the most important aspect when it comes to using the table saw. Thus, keep the following precautionary and safety measures in mind before you purchase the best table saw under $300:

  1. Always be ready with your safety gear when you are planning to use the table saw. Wera the glasses and wear clothes that are half-sleeve to prevent any accident during the cutting process.
  2. If the blade is not all its full spinning speed, don’t overfeed the machine with wood. Wait for some time and let the blade work to its full capacity.
  3. When you are thinking about making any adjustments or changes to the table saw, be sure that the blade has stopped spinning. Only make adjustments when you are 100% sure that the blade is not moving at all.
  4. Before starting the table saw, make sure that you have gone through the user manual properly, and you know everything about this equipment. Not all table saws are the same; thus, even for pro-users, it is important to go through the user manual.
  5. Look at the wood pieces carefully before you use the table saw. Make sure that no foreign objects are attached to the woodblock, as it may cause kickbacks and may lead to injury or accident while cutting.
  6. Have a good posture and body balance when you are using the table saw. Don’t stand right in front as the wood dust may harm you, and you may not get the perfect view while cutting. 
  7. Keep your fingers at proper space from the blade to ensure that you don’t get any cuts or injuries. This is especially important when you are cutting thin wooden blocks.

If you keep all these points in mind, it is guaranteed that you won’t face any safety issues while doing woodwork. These safety tips are applicable to beginners as well as pro-users alike.

Conclusion

These were some of the best table saws under $300 that you could get from different platforms. You don’t need too much money and investment to get the best tool and equipment. To be a pro at woodwork, all you need is an artistic viewpoint and the zeal to get the best result. So, don’t wait too long, purchase any of these table saws and start the woodwork that you always wanted to complete.

This list of best table saws under $300 has been prepared after going through hundreds of reviews by customers on various platforms. Thus, you can completely rely on us if you want to purchase the best table saw for the next woodwork project you want to complete.

So, purchase any of these table saws and let us know which one was the best. So, get these beauties and enjoy your woodwork process in your spring vacation.

John Graham

My name is John Graham, a 32-year old avid DIY-er. Ever since I was young, my father used to prompt me to help fix things around the house or even building my own cupboards and shelves. That’s why I developed the habit of doing everything on my own. And since this is the only way to reach the unique results I really want, I don’t like depending on any services. With all the projects I’ve worked on, I’ve gained a lot of experience and wanted to gather it all in one place. And that’s where the idea to create “Tool Dizer” dawned on me, and here I am trying to connect with all the DIY enthusiasts out there.

Leave a Reply

Your email address will not be published. Required fields are marked *

Don`t copy text!